Ürünlerimiz / Segmanlar / Inch
Segmanlar /
TY Rings
|
|
|
|
|
|
: : : : : TY TIRNAKLI SEGMAN INCH : : : : : | |
|
|
| SHAFT DIAMETER | OUTSIDE DIAMETER
|
No.
Of Prongs |
THICKNESS* | î
Thrust Load
|
WEIGHT
Per 1000 Pcs.
|
Min.
Distance Face of part to end of shaft |
|||||
| Ds DEC-DEZ | Ds FRACT | Ds mm | O.D. | Tol. | T | Tol. | lbs. | lbs. | D1 | ||
| FROM | TO | ||||||||||
| .093 | .095 | 3/32 | 2.39 | .250 | 3 | 13 | .09 | .040 | |||
| .124 | .126 | 1/8 | 3.17 | .325 | 4 | 20 | .14 | .040 | |||
| .155 | .157 | 5/32 | 3.96 | .356 | 4 | .010 | ±.001 | 25 | .17 | .040 | |
| .187 | .189 | 3/16 | 4.77 | .387 | 6 | 35 | .20 | .040 | |||
| .218 | .220 | 7/32 | 5.56 | .418 | 6 | 35 | .21 | .040 | |||
| .239 | .241 | - | 6.10 | .460 | ±.005 | 6 | .015 | ±.002 | 40 | .35 | .060 |
| .249 | .251 | 1/4 | 6.35 | .450 | 6 | 40 | .23 | .040 | |||
| .311 | .313 | 5/16 | 7.92 | .512 | 6 | .010 | ±.001 | 45 | .26 | .040 | |
| .374 | .376 | 3/8 | 9.53 | .575 | 6 | 45 | .27 | .040 | |||
| .437 | .439 | 7/16 | 11.1 | .638 | 6 | 50 | .47 | .060 | |||
| .498 | .502 | 1/2 | 12.7 | .750 | 6 | 50 | .72 | .060 | |||
| .560 | .564 | 9/16 | 14.27 | .812 | 6 | ±.002 | 50 | .75 | .060 | ||
| .623 | .627 | 5/8 | 15.88 | .875 | 7 | .015 | 50 | .82 | .060 | ||
| .748 | .752 | 3/4 | 19.05 | 1.000 | ±.010 | 8 | 55 | .97 | .060 | ||
| .873 | .877 | 7/8 | 22.23 | 1.125 | 10 | 60 | 1.1 | .060 | |||
| .998 | 1.002 | 1 | 25.4 | 1.250 | 10 | 65 | 1.2 | .060 | |||
 |
* FOR PLATED RINGS ADD .002" TO MAXIMUM THICKNESS. |
|
LARGER SIZES MAY BE AVAILABLE UPON REQUEST. |
|
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPT. |
|
THRUST LOAD CAPACITY IF APPLICABLE TO PARTS MADE FROM CARBON SPRING STEEL AND STAINLESS STEEL MATERIALS ONLY FOR HARDNESS SPECIFICATIONS SEE PAGE 94. |
