Ürünlerimiz / Segmanlar / Inch Segmanlar / TX Rings  

 

 

 : : : : : TX TIRNAKLI SEGMAN INCH : : : : :
   

SHAFT DIAMETER OUTSIDE DIAMETER 

 

 No. of prongs *** RING HEIGHT * THICK- NESS **Stan- dard î Thrust Ld. @ Std. T Wght. Per 1000 Pcs. @ Std. T * Thick- ness Optional î Thrust Ld.@ Opt. T WEIGHT Per 1000 Pcs.@ Opt. T Min. Distance Face of part to end of shaft
Ds DEC Ds FRACT Ds mm O.D. Tol.   H Tol. T Tol. lbs. lbs. T Tol. lbs. lbs. D1
FROM TO
.091 .097 3/32 2.39 .326   3 .029     27 .16   45 .25 .058
.121 .129 1/8 3.17 .366   4 .029 ±.005 .010 39 .19 .015 57 .30 .058
.152 .160 5/32 3.96 .397   4 .029   ±.001 46 .22 ±.002 70 .35 .058
.184 .192 3/16 4.77 .444 ±.005 6 .031 ±.007   56 .27   85 .42 .062
.246 .254 1/4 6.35 .522   6 .042     112 .55   58 .39 .074
.308 .316 5/16 7.92 .584   8 .042 ±.008   112 .64 .010 60 .44 .074
.371 .379 3/8 9.53 .645   8 .042     122 .74 ±.001 65 .48 .074
.432 .442 7/16 11.1 .737   10 .045 ±.009   122 .96       .090
.495 .505 1/2 12.7 .828   10 .054   .015 122 1.27       .108
.557 .567 9/16 14.27 .889   12 .054   ±.002 127 1.38       .108
.620 .630 5/8 15.88 .951 ±.010 12 .054 ±.010   137 1.47       .108
.745 .755 3/4 19.05 1.076   14 .054     142 1.65       .108
.870 .880 7/8 22.23 1.203   16 .054     142 1.96       .108
.995 1.005 1 25.4 1.327   18 .054     142 2.29       .108
   
*FOR PLATED RINGS ADD .002" TO MAXIMUM THICKNESS AND HEIGHT. 
** STANDARD THICKNESS FOR STAINLESS STEEL IS AS FOLLOWS:TX-9-TX-37, .010"; TX-43-TX-100, .015".
*** FOR TX-9-TX-18 OPTIONAL THICKNESS (.015"), ADD .005" TO RING HEIGHT VALUES (H) SHOWN.
FOR TX-25-TX-37 OPTIONAL THICKNESS (.010), DEDUCT.005" FROM RING HEIGHT VALUES (H) SHOWN.
FOR HARDNESS SPECIFICATIONS SEE PAGE 94.
THRUST LOAD CAPACITY IF APPLICABLE TO PARTS MADE FROM CARBON SPRING STEEL AND STAINLESS STEEL MATERIALS ONLY.