Ürünlerimiz / Segmanlar / Inch Segmanlar / SHI Shaft Rings  

 

 

 : : : : : SHI MİL ÜSTÜ EMNİYET SEGMANI INCH : : : : :
   

 

SHAFT DIAMETER

GROOVE SIZE

 RING SIZE & WEIGHT CLEAR. DIA. î THRUST LD. (lbs.)
Sqr. Corner Abutment
DIAMETER WIDTH DEPTH  FREE DIAMETER

Thickness***

 Weight
Per
1000
Pcs.

Ex- 
panded
over
shaft

 Released 
in 
groove		 RING
Safety
Factor
of 4		 GROOVE
Safety
Factor
of 2
Ds
DEC		 Ds
FRACT		 Ds
mm		 Dg Tol. W Tol. d Df Tol. T Tol. lbs. L1 L2 Pr Pg
.500 1/2 12.7 .468 ±.002 ,039   ,016 ,461   ,035   1.0 ,67 .645 1117 280
.562 9/16 14,3 .530 .004* ,039   .016 ,521   ,035   1.4 ,75 .72 1269 320
.594 19/32 15,1 ,559   ,039   .017 ,550   ,035   1.6 ,79 .76 1320 370
.625 5/8 15.9 ,588   ,039   .018 ,579   ,035   1,6 ,83 .80 1421 400
.688 11/16 17.5 ,646   ,046   .021 ,635   .042   2.5 ,91 .87 2335 500
.750 3/4 19.0 ,704 ±.003 ,046 +.003 .023 ,693 +.005 .042   2,8 ,99 .95 2538 600
.781 25/32 19.8 ,733 .004* ,046 -.000 .024 ,722 -.010 .042   3.1 1,04 1,00 2639 650
.812 13/16 20.6 ,762   ,046   .025 ,751   .042   3.3 1,08 1,03 2690 700
.875 7/8 22.2 ,821   ,046   ,027 ,810   .042   3.8 1,15 1,10 2893 850
.938 15/16 23.8 ,882   ,046   .028 .867   .042   4,5 1,23 1,18 3147 900
.984 63/64 25.0 ,926   ,046   .029 .925   .042 ±.002 4.8 1,30 1,25 3350 1000
1.000 1 25.4 ,940   ,046   .030 ,925   .042   4,8 1,31 1,26 3350 1050
1,062 1-1/16 27.0 ,998   ,056   .032 .982   .050   6.2 1,38 1,32 4212 1200
1.125 1-1/8 28.6 1,059   ,056   .033 1.041   .050   6.7 1,45 1,39 4466 1300
1.188 1-3/16 30.2 1,118   ,056   .035 1.098 +.010 .050   7.2 1,52 1,46 4720 1450
1.250 1-1/4 31.7 1,176 ±.004 ,056 +.004 .037 1.156 -.015 .050   7.6 1,59 1,52 4974 1600
1.312 1-5/16 33.3 1,232 .005* ,056 -.000 .040 1.214   .050   8.2 1,66 1,58 5227 1850
1.375 1-3/8 34.9 1,291   ,056   .042 1.272   .050   8.4 1,73 1,65 5481 2050
1.438 1-7/16 36.5 1,350   ,056   .044 1.333   .050   9.1 1,80 1,72 5735 2200
1.500 1-1/2 38.1 1,406   ,056   .047 1.387   .050   9,8 1,87 1,78 5938 2500
1.562 1-9/16 39.7 1,468   ,068   .047 1.446   .062   12.9 1,95 1,86 7714 2600
1.625 1-5/8 41.3 1,529   ,068   .048 1.503   .062   13.4 2,02 1,93 8019 2750
1.750 1-3/4 44.4 1,650   ,068   .050 1.637   .062   16.1 2,18 2,08 8628 3100
1.772 - 45.0 1,669 ±.005 ,068   .051 1.637 +.013 .062   16,1 2.20 2.10 8628 3200
1.812 1-13/16 46.0 1,708 .005* ,068   .052 1.675 -.020 .062   17.3 2,24 2,14 8983 3300
1.969 1-31/32 50.0 1,857   ,068   .056 1.819   .062 ±.003 20,5 2,43 2,32 9693 3900
2,000 2 50.8 1,886   ,068   .057 1.850   .062   20.7 2,47 2,36 9896 4000
2.125 2-1/8 54.0 2,003 ±.006 ,086 +.005 .061 1.993   .078   30.0 2,62 2.50 13195 4550
2,156 2-5/32 54.8 2,032 .006* ,086 -.000 .062 1.993 +.015 .078   30.0 2,65 2.53 13195 4700
2.500 2-1/2 63.5 2,360   ,086   .070 2.313 -.025 .078   43,5 3,05 2.92 15530 6200
2.750 2-3/4 69.8 2.602   .103   .074 2.543   .093   57.9 3.34 3.20 20402 7200
2.875 2-7/8 73.0 2.721   .103   .077 2.659   .093   64.5 3.49 3.34 21315 7800
3.156 3-5/32 80.2 2.986   .103   .085 2.920 +.020 .093   77.0 3.82 3.66 23447 9400
3.250 3-1/4 82.5 3.076   .103   .087 3.006 -.030 .093   77.5 3.93 3.76 24056 10000
3.500 3-1/2 88.9 3.316   .120   .092 3.237   .109   107.0 4.22 4.04 30349 11500
3.938 3-15/16 100.0 3.734   .120   .102 3.642   .109   123.0 4.71 4.51 34206 14000
   
* F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPT.
***FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM RING THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM
    

 

 

MAXIMUM SECTION 
(Including Lug)		 MINIMUM
SECTION		 HOLE
DIAMETER

 

 GAGING DIAMETER

ALLOWABLE 
CORNER 
RADII & CHAMFERS

 MAX
LOAD
W/R Max or Ch
Max (in lbs.)		 EDGE
MARGIN		 R.P.M
LIMITS
Standart material
S max Tol. S min. Tol. R Tol. Gd Max R max Ch max P'r Y
,080   ,041   ,042   .64 ,051 ,032 680 ,048 40000
,088 ±.004 .043 ±.004 .042   .715 .057 .036 680 .048 35000
,092   ,046   ,042   .75 ,059 ,037 680 ,052 32000
.096   .048   ,042 +.010 .79 .062 .039 680 .055 30000
,104   ,052   ,042 -.002 .87 ,066 ,042 1000 ,063 28000
,112   ,056   ,042   .945 .071 ,045 1000 .069 26500
,116   ,057   ,042   .98 ,073 ,046 1000 ,072 25500
,120 ±.005 .060 ±.005 ,050   1,02 ,076 ,048 1000 .075 24500
,128   ,064   ,050   1,095 ,080 ,051 1000 ,081 23000
.136   ,068   ,050   1,17 .086 ,054 1000 .084 21500
,144   ,072   ,050   1,24 ,091 ,057 1000 ,087 20000
.144   .072   ,050   1.25 .091 ,057 1000 .090 20000
,147   ,073   ,078   1,31 ,092 ,058 1460 ,096 19000
.150   .075   ,078   1.38 .093 .059 1460 .099 18800
,153   ,076   ,078   1,45 ,094 ,059 1460 ,105 18000
.157 ±.006 ,079 ±.006 ,078 +.015 1,52 ,096 ,060 1460 .111 17000
,161   ,080   ,078 -.002 1,58 ,097 ,061 1460 ,120 16500
,165   ,082   ,078   1,65 ,098 ,061 1460 .126 16000
,169   ,085   ,078   1,715 ,100 ,063 1460 ,132 15000
.173   .086   .078   1,775 ,100 ,063 1460 ,141 14800
,178   ,089   ,078   1.85 .104 ,066 2250 .141 14000
.183   ,092   ,078   1.92 ,108 ,067 2250 .144 13200
,196   ,098   ,078   2,07 ,116 ,073 2250 ,150 11700
,196   ,098   ,078   2.09 .116 ,073 2250 .153 11700
,199   ,100   ,078   2.13 ,117 ,074 2250 ,156 11500
,212   ,106   ,078   2.31 ,124 ,078 2250 ,168 10500
,216   ,108   ,078   2,35 ,127 ,080 2250 ,171 10000
,229   .117   ,120   2,49 ,133 ,084 3750 ,183 9400
,229 ±.007 ,117 ±.007 ,120   2,52 ,133 ,084 3750 ,186 9400
,250   ,130   ,120   2,91 ,151 ,095 3750 ,210 8400
.280   .140   .120   3.19 .165 .103 5500 .222 7600
.290   .145   .120   3.33 .170 .107 5500 .231 7300
.316   .159   .120   3.65 .185 .116 5500 .255 6500
.324 ±.008 .162 ±.008 .120   3.75 .190 .118 5500 .261 6400
.345   .173   .125   4.03 .202 .127 7850 .276 5900
.368   .183   .125   4.50 .212 .133 7850 .306 5200
 
LARGER SIZES MAY BE AVAILABLE UPON REQUEST.