Ürünlerimiz / Segmanlar / Inch
Segmanlar /
RG Rings
|
|
|
|
|
|
: : : : : RG TİPİ ÖZEL MİL ÜSTÜ SEGMAN INCH : : : : : | |
|
|
| SHAFT | RING SIZE & WEIGHT | CLEAR. | î
THRUST LOAD Allow- able load (lbs.) |
RPM LIMITS Standard Material |
|||||||||
| DIAMETER | FREE DIAMETER |
THICKNESS*** | NOTCH DIA. |
MAXIMUM SECTION |
Weight Per 1000 Pcs. |
Installed on shaft |
|||||||
| Ds DEC | Ds | Dsmm | Df | Tol. | T | TOL. | R Ref. | S Ref. | lbs. | L2 | P'r | OVER 80.000 |
|
| FROM | TO | ||||||||||||
| .092 | .096 | 3/32 | 2,4 | ,089 | +.002 | ,025 | .040 | .045 | .14 | .30 | 8 | ||
| .123 | .127 | 1/8 | 3,2 | ,119 | -.003 | ,025 | .040 | .054 | .19 | .34 | 10 | ||
| .154 | .158 | 5/32 | 4,0 | ,149 | +.002 | ,025 | .040 | .078 | .27 | .38 | 13 | ||
| .185 | .189 | 3/16 | 4,8 | .179 | -.004 | ,035 | ±.002 | .048 | .085 | .45 | .44 | 18 | |
| .248 | .252 | 1/4 | 6,3 | .238 | ,035 | .048 | .100 | .74 | .54 | 22 | |||
| .310 | .316 | 5/16 | 7,9 | ,298 | +.003 | ,042 | .052 | .114 | 1.1 | .66 | 32 | ||
| .373 | .379 | 3/8 | 9,5 | ,356 | -.005 | ,042 | .052 | .130 | 1.5 | .76 | 42 | ||
 |
î VALUES SHOWN APPLY TO RINGS INSTALLED ON A SHAFT MADE OF LOW CARBON STEEL. |
|
FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. |
|
***FOR PLATED RINGS, ADD.002" TO THE LISTED MAXIMUM THICKNESS. |
