Ürünlerimiz / Segmanlar / Inch
Segmanlar / RE
|
|
|
|
|
|
: : : : : RE ÖZEL TİP AY SEGMANI INCH : : : : : | |
|
|
| SHAFT | GROOVE SIZE | RING SIZE & WEIGHT | CLEARANCE DIA. | î THRUST LD. (lbs.) Sqr. Corner Abutment | ||||||||||||
| DIAMETER | DIAMETER | WIDTH | DEPTH | FREE DIAMETER | THICKNESS *** |
Weight. Per 1000 Pcs |
Free Out- Side Dia. |
Installed In Groove |
Ring Safety factor of 3 |
Groove Safety factor of 2 |
||||||
| Ds DEC | Ds FRACT | Ds mm | Dg | Tol. | W | Tol. | d | Df | Tol. | T | Tol. | lbs. | Ref. G | L2 | Pr | Pg |
| .094 | 3/32 | 2.4 | ,074 | +.002 | ,020 | +.002 | .010 | .072 | +.001 | .015 | .07 | .206 | .219 | 51 | 13 | |
| .125 | 1/8 | 3.2 | ,095 | -.000 | ,020 | -.000 | .015 | .093 | -.003 | .015 | .13 | .270 | .283 | 76 | 25 | |
| .156 | 5/32 | 4.0 | ,116 | .0015* | ,029 | .020 | .113 | +.002-.003 | .025 | .31 | .335 | .35 | 152 | 40 | ||
| .188 | 3/16 | 4.8 | ,147 | .029 | .020 | .143 | .025 | .39 | .375 | .39 | 183 | 50 | ||||
| .219 | 7/32 | 5.6 | ,188 | ±.002 | ,029 | .015 | .182 | ±.003 | .025 | ±.002 | .54 | .446 | .46 | 223 | 50 | |
| .250 | 1/4 | 6.3 | ,210 | .002* | ,029 | .020 | .204 | .025 | .71 | .516 | .53 | 254 | 75 | |||
| .312 | 5/16 | 7.9 | ,250 | ±.003 | ,029 | +.003 | .031 | .242 | .025 | .85 | .588 | .61 | 305 | 135 | ||
| .375 | 3/8 | 9.5 | ,303 | .003* | ,039 | -.000 | .036 | .292 | .035 | 1.5 | .660 | .68 | 528 | 190 | ||
| .438 | 7/16 | 11.1 | ,343 | ,039 | .047 | .332 | .035 | 1.9 | .746 | .77 | 609 | 285 | ||||
| .500 | 1/2 | 12.7 | ,396 | ±.003 | ,046 | .052 | .385 | ±.004 | .042 | 3.2 | .810 | .83 | 832 | 360 | ||
| .562 | 9/16 | 14.3 | ,437 | .004* | ,046 | .062 | .430 | .042 | 3.5 | .870 | .89 | 944 | 480 | |||
 |
* F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT. |
|
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPT. |
|
*** FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
|
|
| ALLOWABLE
CORNER RADII & CHAMFERS |
MAX LOAD W/ R |
EDGE MARGIN |
R.P.M
LIMITS |
|
| R max | Ch max | P'r | Y | |
| .045 | .033 | 50 | .020 | 90000 |
| .045 | .033 | 75 | .030 | 70000 |
| .065 | .050 | 150 | .040 | 60000 |
| .065 | .050 | 180 | .040 | 50000 |
| .065 | .050 | 220 | .031 | 43000 |
| .065 | .050 | 250 | .040 | 38000 |
| .070 | .055 | 300 | .062 | 32000 |
| .070 | .055 | 520 | .072 | 28000 |
| .070 | .055 | 600 | .094 | 24000 |
| .080 | .060 | 820 | .104 | 20000 |
| .080 | .060 | 930 | .124 | 17000 |
|
NOTE: CONTACT ROTOR CLIP FOR AVAILABILITY OF SIZES LISTED. LARGER SIZES MAY BE AVAILABLE UPON REQUEST. |
