Ürünlerimiz / Segmanlar / Inch Segmanlar / EL   

 

 

 : : : : : EL TİPİ ÖZEL SEGMAN : : : : :
   

SHAFT GROOVE SIZE RING SIZE & WEIGHT

CLR. DIA.

 îTHRUST LOAD (lbs.sq. corner abutment)
DIAMETER
INCHES		 DIAMETER WIDTH DEPTH LENGTH THICKNESS
***		 BOW HEIGHT GAP WGHT. PER 
1000
Pcs.		 Released
In
Groove		 Ring Safety
Factor 
Of 3		 Groove Safety
Factor
Of 3
DEC   FRACT Dg Tol. W TOL. d B Tol. T Tol. Bh Tol. A Tol. LBS. C  Pr Pg
.092   3/32 .061 ±.001 .035 .016 .307 .010   .050 .063   .23 .370 80 35
,125 ±.002 1/8 ,082 ±.0015 ,035 ,021 ,307 ,010 ±.001 ,050 ,086 ±.004 ,19 ,370 102 60
,188   3/16 ,124 ±.002 ,045 +.005 ,032 ,390 ±.010 ,015   ,060 ±.010 ,130   ,47 ,480 203 140
,250 ±.003 1/4 ,165 ,055 -.000 ,042 ,500   ,015 ±.002 ,070   ,172 ±.005 ,77 ,620 305 250
,312   5/16 ,228 ±.003 ,080   ,042 ,620   ,015   ,095   ,234   1,3 ,790 355 300
.375   3/8 .270   .095   .052 .740   .020   .130   ,280   2.2 .940 555 450
   
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
LARGER SIZES MAY BE AVAILABLE UPON REQUEST.
***For plated rings, add .002" to the listed maximum thickness.
    

 

 

DISTANCE RESILIENT 
TAKE-UP OF TOLERANCES
OF A&B		 FORCE NEEDED
TO FLATTEN RINGS

APPROX. AV RESILIENT RES. (lbs) WITHIN J MAX. & J MIN

 EDGE
MARGIN
OUTER GROOVE WALL TO FACE OF RETAINED PART
J MIN. J MAX. J MAX. - J MIN. LBS. INSTALLED FLATTENED f REF. Y
.030 .038 .008 30 9 3.5 .166 .031
,030 ,040 ,010 30 8 3,0 ,166 ,043
,039 ,049 ,010 60 20 5,5 ,213 ,064
,045 ,060 ,015 60 15 7,0 ,280 ,085
,070 ,085 ,015 60 6 4,0 ,360 ,084
.080 .105 .025 80 19 7,0 ,427 ,105