Ürünlerimiz / Segmanlar / Inch Segmanlar / E (RS)   

 

 

 : : : : : E (RS) TİPİ INCH SEGMAN : : : : :
   

 

SHAFT GROOVE SIZE RING SIZE & WEIGHT CLEARANCE DIA. î THRUST LD. (lbs.)
 Sqr. corner abutment
DIAMETER DIAMETER WIDTH DEPTH FREE
DIAMETER		 THICKNESS
***		 Weight. 
Per
1000
pcs.		 Free out-side
dia.
REF.		 Installed
in
groove		 Ring Safety factor of 3 Ring Groove Safety factor of 2
Nut
Ds DEC Ds
FRAC		 Ds
mm		 Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Pr Pg
.040 - 1,0 ,026   ,012   .007 .025 +.001 .010   .009 .079 .090 13 6
.062 1/16 1,6 ,052 +.002 .012 +.002 ,005 .051 -.003 .010 ±.001 .030 .156 .165 20 7
.062 1/16 1,6 ,052 -.000 ,012 -.000 .005 .051   .010   .028 .140 .150 20 7
.062 1/16 1,6 ,052 *.0015 ,023   .005 .051   .020   .094 .187 .200 41 7
.094  3/32 2,4 ,074   .020   .010 .069 +.002-.003 .015   .10 .230 .245 46 20
.094 3/32 2,4 ,074   ,020   ,010 .073   .015   .058 .187 .200 46 20
.110 7/64 2,8 ,079   ,020   ,015 .076   .015   .31 .375 .390 61 40
,125 1/8 3,2 ,095   .029   .015 .094   .025   .12 .214 .225 110 45
,125 1/8 3,2 ,095   ,020   .015 .094   .015   .087 .230 .240 66 45
,140 9/64 3,6 ,102   ,020   .019 .100   .015   .060 .203 .215 76 60
,140 9/64 3,6 ,110   ,020   .015 .108   .015   .10 .250 .265 76 45
,140 9/64 3,6 ,105 +.002 ,029   .017 .102 +.001 .025 ±.002 .21 .270 .285 173 60
,156 5/32 4,0 ,118 -.000 ,046   .019 .116 -.003 .042   .76 .375 .390 300 70
,156 5/32 4,0 ,116 *.002 ,029   ,020 .114   .025   .21 .282 .295 178 75
,172 11/64 4,4 ,127   ,029   ,022 .125   .025   .24 .312 .325 183 90
,188 3/16 4,8 ,125   ,029   ,031 .122   .025   .45 .375 .39 203 135
,188 3/16 4,8 ,147   ,029   ,020 .145   .025   .70 .470 .485 193 90
,188 3/16 4,8 ,125   ,029   ,031 .122   .025   1.05 .550 .565 203 135
,188 3/16 4,8 ,147   ,029   ,020 .145   .025   .29 .335 .35 193 90
.219 7/32 5,6 ,188   ,029   ,015 .185   .025   .47 .437 .45 228 75
.250 1/4 6,3 .210   ,029   .020 .207   .025   .76 .527 .54 259 115
.312 5/16 7.9 .250 +.003 ,029 +.003 .031 .243 +.002 .025   .57 .500 .52 330 225
,312 5/16 7,9 .250 -.000 ,029 -.000 .031 .243 -.004 .025   1,220 .670 .685 325 220
,375 3/8 9,5 ,306 *.004 ,039   .034 .303    .035    1,050 .567 .587 680 300
.375 3/8 9.5 .303    ,039    .036 .300    .035    1.5 .660 .68 700 315
,438 7/16 11.1 ,343   ,039   ,047  .337   .035   1.5 .687 .71 842 480
,438 7/16 11.1 ,380   ,039   ,029 .375   .035   1.0 .600 .62 812 280
,500 1/2 12,7 ,396   ,046   ,052 .392   .042   2.5 .800 .82 1127 600
,625 5/8 15.9 ,485   ,046   ,070 .480   .042   3.2 .940 .96 1441 1050
,750 3/4 19.0 ,625   ,056   ,062 .616 +.003 .050   4.3 1,000 1,02 1979 1100
,750 3/4 19.0 ,580   ,056   ,085 .574 -.005 .050   5.8 1,120 1,14 2030 1500
,875 7/8 22.2 ,675   ,056   ,100 .668   .050   7.6 1,300 1,32 2385 2050
,984 63/64 25.0 ,835   ,056   ,074 .822   .050   9.2 1,500 1,53 2639 1750
1,000 1 25.4 ,835   ,056   ,082 .822   .050   9.2 1,500 1,53 2690 1900
1,188 1-3/16 30.2 1,079 +.005 ,068 +.004 ,054 1.066 +.006 .062 ±.003 11.3 1,626 1,67 3501 1500
1,375 1-3/8 34.9 1,230 -.000 *.005 ,068 -.000 ,072 1.213 -.010 .062   15.4 1,875 1,92 4162 2350
   
LISTED GROOVE WIDTH (W) MINIMUM.
* F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
** AVAILABLE IN BERYLLIUM COPPER ONLY.
î BASED ON GROOVES MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND 0THER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
*** FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE
    

 

  

 

RING
NO.		 ALLOWABLE CORNER
RADII & CHAMFERS		 MAX LOAD w/ R max
or Ch max (in lbs.)		 EDGE MARGIN R.P.M.
LIMITS Standard material
R max Ch max P'r Y
**E-4 .015 .010 13 .014 40000
E-6 .030 .020 20 .010 40000
SE-6 .030 .020 20 .010 40000
YE-6 .035 .025 40 .010 40000
SE-9 .053 .040 45 .020 36000
E-9 .040 .030 45 .020 36000
SE-11 .080 .060 60 .030 35000
SE-12 .040 .030 108 .030 35000
E-12 .040 .030 65 .030 35000
SE-14 .029 .022 75 .038 32000
YE-14 .040 .030 75 .030 32000
E-14 .060 .045 170 .034 32000
SE-15 .080 .060 250 .038 31000
E-15 .060 .045 175 .040 31000
SE-17 .060 .045 180 .044 30000
SE-18 .060 .045 200 .062 30000
YE-18 .060 .045 190 .040 25000
ZE-18 .060 .045 200 .062 18000
E-18 .060 .045 190 .040 30000
SE-21 .060 .045 225 .030 26000
E-25 .060 .045 255 .040 25000
SE-31 .060 .045 325 .062 22000
YE-31 .060 .045 320 .062 15000
SE-37 .060 .045 680 .068 20000
E-37 .065 .050 690 .072 20000
E-43 .065 .050 830 .094 16500
SE-43 .050 .035 800 .058 16500
E-50 .080 .060 1110 .104 14000
E-62 .080 .060 1420 .140 12000
SE-74 .057 .042 1900 .124 11000
E-75 .085 .065 2000 .170 10500
E-87 .085 .065 2350 .200 9000
SE-98 .085 .065 2700 .148 6500
SE-98 .077 .057 2700 .164 6500
SE-118 .090 .070 3450 .108 5500
SE-137 .090 .070 4100 .144 4000
   
LARGER SIZES MAY BE  AVAILABLE UPON REQUEST.