Ürünlerimiz / Segmanlar / Metrik
Segmanlar / DIN
471
|
|
|
|
|
|
: : : : : DIN 471 Mil Segmaný : : : : : |
|
|
| DIN 471-1 | |
| SHAFT | GROOVE SIZE | RING SIZE & WEIGHT | SUPPLEMENTARY DATA | |||||||||||||||
| DIA. (mm) |
DIAMETER
|
WIDTH
|
DEPTH
|
THICKNESS *** |
FREE DIAMETER |
LUG HT. |
MAX. SEC. |
HOLE DIA. |
WEIGHT
|
EDGE MARGIN |
THRUST LOAD Ring |
THRUST LOAD Groove |
Allowable Rad/ Cham. |
Max. Load w/Ch Max. |
RPM Limits
|
|||
| Ds | Dg | TOL. | W Min. | d | T | Tol. | Df | Tol. | H Max. | S Ref. | R Min. | kg/ 1000 |
Y Min. |
Pr kN |
Pg kN |
R/Ch Max. |
P'r kN |
|
| 170 | 165,0 | 4,15 | 2,50 | 4,00 | 160,5 | 13,5 | 12,9 | 4,0 | 170,0 | 7,5 | 349,0 | 219,0 | 5,0 | 41,90 | 2000 | |||
| 172 | 167,0 | 4,15 | 2,50 | 4,00 | 160,5 | 13,5 | 12,9 | 4,0 | 170,0 | 7,5 | 344,0 | 221,0 | 5,0 | 41,30 | 2000 | |||
| 175 | 170,0 | 4,15 | 2,50 | 4,00 | 165,5 | 13,5 | 12,9 | 4,0 | 180,0 | 7,5 | 340,0 | 225,0 | 5,0 | 40,70 | 2000 | |||
| 177 | 172,0 | -0,63 | 4,15 | 2,50 | 4,00 | 167,5 | 14,2 | 13,5 | 4,0 | 183,0 | 7,5 | 335,0 | 228,0 | 5,0 | 40,20 | 2000 | ||
| 178 | 173,0 | 4,15 | 2,50 | 4,00 | 167,5 | +0,63 | 14,2 | 13,5 | 4,0 | 183,0 | 7,5 | 349,0 | 229,0 | 5,0 | 42,00 | 2000 | ||
| 180 | 175,0 | 4,15 | 2,50 | 4,00 | 170,5 | -1,50 | 14,2 | 13,5 | 4,0 | 190,0 | 7,5 | 345,0 | 232,0 | 5,0 | 41,40 | 2000 | ||
| 182 | 177,0 | 4,15 | 2,50 | 4,00 | 170,5 | 14,2 | 13,5 | 4,0 | 190,0 | 7,5 | 341,0 | 235,0 | 5,0 | 41,00 | 2000 | |||
| 185 | 180,0 | 4,15 | 2,50 | 4,00 | -0,10 | 175,5 | 14,2 | 13,5 | 4,0 | 200,0 | 7,5 | 336,0 | 238,0 | 5,0 | 40,40 | 2000 | ||
| 187 | 182,0 | 4,15 | 2,50 | 4,00 | 177,5 | 14,2 | 14,0 | 4,0 | 203,0 | 7,5 | 338,0 | 241,0 | 5,0 | 40,50 | 2000 | |||
| 188 | 183,0 | 4,15 | 2,50 | 4,00 | 177,5 | 14,2 | 14,0 | 4,0 | 203,0 | 7,5 | 337,0 | 242,0 | 5,0 | 40,60 | 2000 | |||
| 190 | 185,0 | 4,15 | 2,50 | 4,00 | 180,5 | 14,2 | 14,0 | 4,0 | 210,0 | 7,5 | 333,0 | 245,0 | 5,0 | 40,00 | 2000 | |||
| 192 | 187,0 | 4,15 | 2,50 | 4,00 | 180,5 | 14,2 | 14,0 | 4,0 | 210,0 | 7,5 | 330,0 | 248,0 | 5,0 | 39,60 | 2000 | |||
| 195 | 190,0 | 4,15 | 2,50 | 4,00 | 185,5 | 14,2 | 14,0 | 4,0 | 220,0 | 7,5 | 325,0 | 251,0 | 5,0 | 39,00 | 2000 | |||
| 197 | 192,0 | 4,15 | 2,50 | 4,00 | 187,5 | 14,2 | 14,0 | 4,0 | 223,0 | 7,5 | 322,0 | 254,0 | 5,0 | 38,60 | 2000 | |||
| 198 | 193,0 | 4,15 | 2,50 | 4,00 | 187,5 | 14,2 | 14,0 | 4,0 | 223,0 | 7,5 | 322,0 | 255,0 | 5,0 | 38,70 | 2000 | |||
| 200 | 195,0 | 4,15 | 2,50 | 4,00 | 190,5 | 14,2 | 14,0 | 4,0 | 230,0 | 7,5 | 319,0 | 258,0 | 5,0 | 38,30 | 2000 | |||
| 202 | 196,0 | 5,15 | 3,00 | 5,00 | 190,0 | 14,2 | 14,0 | 4,0 | 235,0 | 9,0 | 624,0 | 312,0 | 6,0 | 62,50 | 2000 | |||
| 205 | 199,0 | 5,15 | 3,00 | 5,00 | 193,0 | 14,2 | 14,0 | 4,0 | 243,0 | 9,0 | 611,0 | 317,0 | 6,0 | 61,30 | 2000 | |||
| 207 | 201,0 | 5,15 | 3,00 | 5,00 | 193,0 | 14,2 | 14,0 | 4,0 | 243,0 | 9,0 | 608,0 | 320,0 | 6,0 | 60,90 | 2000 | |||
| 208 | 202,0 | 5,15 | 3,00 | 5,00 | 193,0 | 14,2 | 14,0 | 4,0 | 243,0 | 9,0 | 605,0 | 321,0 | 6,0 | 60,50 | 2000 | |||
| 210 | 204,0 | 5,15 | 3,00 | 5,00 | 198,0 | 14,2 | 14,0 | 4,0 | 248,0 | 9,0 | 598,0 | 325,0 | 6,0 | 59,90 | 2000 | |||
| 212 | 206,0 | 5,15 | 3,00 | 5,00 | 198,0 | 14,2 | 14,0 | 4,0 | 248,0 | 9,0 | 593,0 | 328,0 | 6,0 | 59,50 | 2000 | |||
| 215 | 209,0 | 5,15 | 3,00 | 5,00 | 203,0 | 14,2 | 14,0 | 4,0 | 260,0 | 9,0 | 585,0 | 332,0 | 6,0 | 58,50 | 2000 | |||
| 217 | 211,0 | 5,15 | 3,00 | 5,00 | 203,0 | 14,2 | 14,0 | 4,0 | 260,0 | 9,0 | 580,0 | 336,0 | 6,0 | 58,10 | 2000 | |||
| 218 | 212,0 | 5,15 | 3,00 | 5,00 | 203,0 | +0,72 | 14,2 | 14,0 | 4,0 | 260,0 | 9,0 | 577,0 | 337,0 | 6,0 | 57,80 | 2000 | ||
| 220 | 214,0 | -0,72 | 5,15 | 3,00 | 5,00 | 208,0 | -1,70 | 14,2 | 14,0 | 4,0 | 265,0 | 9,0 | 572,0 | 340,0 | 6,0 | 57,30 | 2000 | |
| 222 | 216,0 | 5,15 | 3,00 | 5,00 | 208,0 | 14,2 | 14,0 | 4,0 | 265,0 | 9,0 | 567,0 | 343,0 | 6,0 | 56,80 | 2000 | |||
| 225 | 219,0 | 5,15 | 3,00 | 5,00 | 213,0 | 14,2 | 14,0 | 4,0 | 280,0 | 9,0 | 559,0 | 349,0 | 6,0 | 56,00 | 2000 | |||
| 227 | 221,0 | 5,15 | 3,00 | 5,00 | -0,12 | 213,0 | 14,2 | 14,0 | 4,0 | 280,0 | 9,0 | 555,0 | 351,0 | 6,0 | 55,50 | 1000 | ||
| 228 | 222,0 | 5,15 | 3,00 | 5,00 | 213,0 | 14,2 | 14,0 | 4,0 | 280,0 | 9,0 | 552,0 | 353,0 | 6,0 | 55,40 | 1000 | |||
| 230 | 224,0 | 5,15 | 3,00 | 5,00 | 218,0 | 14,2 | 14,0 | 4,0 | 290,0 | 9,0 | 548,0 | 356,0 | 6,0 | 55,00 | 1000 | |||
| 232 | 226,0 | 5,15 | 3,00 | 5,00 | 218,0 | 14,2 | 14,0 | 4,0 | 290,0 | 9,0 | 543,0 | 359,0 | 6,0 | 54,50 | 1000 | |||
| 235 | 229,0 | 5,15 | 3,00 | 5,00 | 223,0 | 14,2 | 14,0 | 4,0 | 305,0 | 9,0 | 537,0 | 364,0 | 6,0 | 53,80 | 1000 | |||
| 237 | 231,0 | 5,15 | 3,00 | 5,00 | 223,0 | 14,2 | 14,0 | 4,0 | 305,0 | 9,0 | 532,0 | 367,0 | 6,0 | 53,40 | 1000 | |||
| 238 | 232,0 | 5,15 | 3,00 | 5,00 | 223,0 | 14,2 | 14,0 | 4,0 | 305,0 | 9,0 | 530,0 | 369,0 | 6,0 | 53,00 | 1000 | |||
| 240 | 234,0 | 5,15 | 3,00 | 5,00 | 228,0 | 14,2 | 14,0 | 4,0 | 310,0 | 9,0 | 530,0 | 372,0 | 6,0 | 53,00 | 1000 | |||
| 242 | 236,0 | 5,15 | 3,00 | 5,00 | 228,0 | 14,2 | 14,0 | 4,0 | 310,0 | 9,0 | 520,0 | 375,0 | 6,0 | 52,20 | 1000 | |||
| 245 | 239,0 | 5,15 | 3,00 | 5,00 | 233,0 | 14,2 | 14,0 | 4,0 | 325,0 | 9,0 | 515,0 | 380,0 | 6,0 | 51,50 | 1000 | |||
| 247 | 241,0 | 5,15 | 3,00 | 5,00 | 233,0 | 14,2 | 14,0 | 4,0 | 325,0 | 9,0 | 511,0 | 383,0 | 6,0 | 51,20 | 1000 | |||
| 248 | 242,0 | 5,15 | 3,00 | 5,00 | 233,0 | 14,2 | 14,0 | 4,0 | 325,0 | 9,0 | 508,0 | 385,0 | 6,0 | 50,90 | 1000 | |||
| 250 | 244,0 | 5,15 | 3,00 | 5,00 | 238,0 | 14,2 | 14,0 | 4,0 | 335,0 | 9,0 | 504,0 | 388,0 | 6,0 | 50,50 | 1000 | |||
| 252 | 244,0 | 5,15 | 4,00 | 5,00 | 238,0 | 16,2 | 16,0 | 5,0 | 335,0 | 12,0 | 563,0 | 519,0 | 6,0 | 56,40 | 1000 | |||
| 255 | 247,0 | 5,15 | 4,00 | 5,00 | 240,0 | 16,2 | 16,0 | 5,0 | 348,0 | 12,0 | 557,0 | 525,0 | 6,0 | 55,70 | 1000 | |||
 |
ALL DIMENSIONS IN MILLIMETERS. |
|
*The radius "R" on the load side must not exceed 0.1T. |
|
*** FOR PLATED RINGS, ADD 002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
| SHAFT | GROOVE SIZE | RING SIZE & WEIGHT | SUPPLEMENTARY DATA | |||||||||||||||
| DIA. (mm) |
DIAMETER | WIDT | DEPTH | THICKNESS *** |
FREE DIAMETER |
LUG HT. |
MAX. SEC. |
HOLE DIA. |
WEIGHT | EDGE MARGIN |
THRUST LOAD Ring |
THRUST LOAD Groove |
Allo- wable Rad/ Cham. |
Max. Load w/Ch Max. |
RPM Limits |
|||
| Ds | Dg | TOL. | W Min. | d | T | Tol. | Df | Tol. | H Max. | S Ref. | R Min. | kg/ 1000 |
Y Min. | Pr kN | Pg kN | R/Ch Max. |
P'r kN |
|
| 257 | 249,0 |
-0,72 |
5,15 | 4,00 | 5,00 | 240,0 | 16,2 | 16,0 | 5,0 | 348,0 | 12,0 | 551,0 | 529,0 | 6,0 | 55,20 | 1000 | ||
| 258 | 250,0 | 5,15 | 4,00 | 5,00 | 240,0 | 16,2 | 16,0 | 5,0 | 348,0 | 12,0 | 550,0 | 531,0 | 6,0 | 55,10 | 1000 | |||
| 260 | 252,0 | 5,15 | 4,00 | 5,00 | 245,0 | +0,72 | 16,2 | 16,0 | 5,0 | 355,0 | 12,0 | 540,0 | 535,0 | 6,0 | 54,60 | 1000 | ||
| 262 | 254,0 | 5,15 | 4,00 | 5,00 | 245,0 | -1,70 | 16,2 | 16,0 | 5,0 | 355,0 | 12,0 | 542,0 | 540,0 | 6,0 | 54,40 | 1000 | ||
| 265 | 257,0 | 5,15 | 4,00 | 5,00 | 250,0 | 16,2 | 16,0 | 5,0 | 370,0 | 12,0 | 536,0 | 546,0 | 6,0 | 53,70 | 1000 | |||
| 267 | 259,0 | 5,15 | 4,00 | 5,00 | 250,0 | 16,2 | 16,0 | 5,0 | 370,0 | 12,0 | 532,0 | 550,0 | 6,0 | 53,30 | 1000 | |||
| 268 | 260,0 | 5,15 | 4,00 | 5,00 | 250,0 | 16,2 | 16,0 | 5,0 | 370,0 | 12,0 | 529,0 | 553,0 | 6,0 | 53,00 | 1000 | |||
| 270 | 262,0 | 5,15 | 4,00 | 5,00 | 255,0 | 16,2 | 16,0 | 5,0 | 375,0 | 12,0 | 525,0 | 556,0 | 6,0 | 52,50 | 1000 | |||
| 272 | 264,0 | 5,15 | 4,00 | 5,00 | 255,0 | 16,2 | 16,0 | 5,0 | 375,0 | 12,0 | 522,0 | 560,0 | 6,0 | 52,00 | 1000 | |||
| 275 | 267,0 | 5,15 | 4,00 | 5,00 | 260,0 | 16,2 | 16,0 | 5,0 | 390,0 | 12,0 | 516,0 | 566,0 | 6,0 | 51,00 | 1000 | |||
| 277 | 269,0 | 5,15 | 4,00 | 5,00 | -0,12 | 260,0 | 16,2 | 16,0 | 5,0 | 390,0 | 12,0 | 513,0 | 571,0 | 6,0 | 51,00 | 1000 | ||
| 278 | 270,0 | 5,15 | 4,00 | 5,00 | 260,0 | 16,2 | 16,0 | 5,0 | 390,0 | 12,0 | 510,0 | 574,0 | 6,0 | 51,00 | 1000 | |||
| 280 | 272,0 | 5,15 | 4,00 | 5,00 | 265,0 | 16,2 | 16,0 | 5,0 | 398,0 | 12,0 | 508,0 | 576,0 | 6,0 | 50,00 | 1000 | |||
| 282 | 274,0 | 5,15 | 4,00 | 5,00 | 265,0 | 16,2 | 16,0 | 5,0 | 398,0 | 12,0 | 503,0 | 580,0 | 6,0 | 50,00 | 1000 | |||
| 285 | 277,0 | -0,81 | 5,15 | 4,00 | 5,00 | 270,0 | 16,2 | 16,0 | 5,0 | 410,0 | 12,0 | 499,0 | 587,0 | 6,0 | 50,00 | 1000 | ||
| 287 | 279,0 | 5,15 | 4,00 | 5,00 | 270,0 | 16,2 | 16,0 | 5,0 | 410,0 | 12,0 | 494,0 | 591,0 | 6,0 | 49,00 | 1000 | |||
| 288 | 280,0 | 5,15 | 4,00 | 5,00 | 270,0 | +0,81 | 16,2 | 16,0 | 5,0 | 410,0 | 12,0 | 493,0 | 594,0 | 6,0 | 49,00 | 1000 | ||
| 290 | 282,0 | 5,15 | 4,00 | 5,00 | 275,0 | -2,00 | 16,2 | 16,0 | 5,0 | 418,0 | 12,0 | 490,0 | 599,0 | 6,0 | 49,00 | 1000 | ||
| 292 | 284,0 | 5,15 | 4,00 | 5,00 | 275,0 | 16,2 | 16,0 | 5,0 | 418,0 | 12,0 | 487,0 | 603,0 | 6,0 | 48,00 | 1000 | |||
| 295 | 287,0 | 5,15 | 4,00 | 5,00 | 280,0 | 16,2 | 16,0 | 5,0 | 430,0 | 12,0 | 481,0 | 609,0 | 6,0 | 48,00 | 1000 | |||
| 297 | 289,0 | 5,15 | 4,00 | 5,00 | 280,0 | 16,2 | 16,0 | 5,0 | 430,0 | 12,0 | 479,0 | 613,0 | 6,0 | 48,00 | 1000 | |||
| 298 | 290,0 | 5,15 | 4,00 | 5,00 | 280,0 | 16,2 | 16,0 | 5,0 | 430,0 | 12,0 | 476,0 | 615,0 | 6,0 | 47,00 | 1000 | |||
| 300 | 292,0 | 5,15 | 4,00 | 5,00 | 285,0 | 16,2 | 16,0 | 5,0 | 440,0 | 12,0 | 475,0 | 619,0 | 6,0 | 47,00 | 1000 | |||
| 305 | 295,0 | 6,20 | 5,00 | 6,00 | 288,0 | 20,2 | 20,0 | 6,0 | 738,0 | 15,0 | 1036,0 | 785,0 | 7,0 | 89,00 | 1000 | |||
| 310 | 300,0 | 6,20 | 5,00 | 6,00 | 293,0 | 20,2 | 20,0 | 6,0 | 750,0 | 15,0 | 1016,0 | 796,0 | 7,0 | 87,00 | 1000 | |||
| 315 | 305,0 | 6,20 | 5,00 | 6,00 | 298,0 | 20,2 | 20,0 | 6,0 | 760,0 | 15,0 | 1007,0 | 811,0 | 7,0 | 86,00 | 1000 | |||
| 320 | 310,0 | 6,20 | 5,00 | 6,00 | 303,0 | 20,2 | 20,0 | 6,0 | 770,0 | 15,0 | 988,0 | 825,0 | 7,0 | 85,00 | 1000 | |||
| 325 | 315,0 | 6,20 | 5,00 | 6,00 | 308,0 | 20,2 | 20,0 | 6,0 | 787,0 | 15,0 | 975,0 | 837,0 | 7,0 | 83,00 | 1000 | |||
| 330 | 320,0 | 6,20 | 5,00 | 6,00 | 313,0 | 20,2 | 20,0 | 6,0 | 800,0 | 15,0 | 958,0 | 850,0 | 7,0 | 82,00 | 1000 | |||
| 335 | 325,0 | 6,20 | 5,00 | 6,00 | 318,0 | 20,2 | 20,0 | 6,0 | 826,0 | 15,0 | 945,0 | 864,0 | 7,0 | 81,00 | 1000 | |||
| 340 | 330,0 | 6,20 | 5,00 | 6,00 | 323,0 | 20,2 | 20,0 | 6,0 | 840,0 | 15,0 | 932,0 | 876,0 | 7,0 | 80,00 | 1000 | |||
| 345 | 335,0 | 6,20 | 5,00 | 6,00 | 328,0 | 20,2 | 20,0 | 6,0 | 845,0 | 15,0 | 917,0 | 890,0 | 7,0 | 79,00 | 1000 | |||
| 350 | 340,0 | 6,20 | 5,00 | 6,00 | -0,15 | 333,0 | 20,2 | 20,0 | 6,0 | 850,0 | 15,0 | 906,0 | 903,0 | 7,0 | 77,00 | 1000 | ||
| 355 | 345,0 | 6,20 | 5,00 | 6,00 | 338,0 | 20,2 | 20,0 | 6,0 | 865,0 | 15,0 | 894,0 | 916,0 | 7,0 | 76,00 | 1000 | |||
| 360 | 350,0 | -0,89 | 6,20 | 5,00 | 6,00 | 343,0 | +0,90 | 20,2 | 20,0 | 6,0 | 880,0 | 15,0 | 880,0 | 928,0 | 7,0 | 75,00 | 1000 | |
| 365 | 355,0 | 6,20 | 5,00 | 6,00 | 348,0 | -2,00 | 20,2 | 20,0 | 6,0 | 885,0 | 15,0 | 868,0 | 942,0 | 7,0 | 74,00 | 1000 | ||
| 370 | 360,0 | 6,20 | 5,00 | 6,00 | 353,0 | 20,2 | 20,0 | 6,0 | 890,0 | 15,0 | 856,0 | 955,0 | 7,0 | 73,00 | 1000 | |||
| 375 | 365,0 | 6,20 | 5,00 | 6,00 | 358,0 | 20,2 | 20,0 | 6,0 | 910,0 | 15,0 | 847,0 | 968,0 | 7,0 | 72,00 | 1000 | |||
| 380 | 370,0 | 6,20 | 5,00 | 6,00 | 363,0 | 20,2 | 20,0 | 6,0 | 930,0 | 15,0 | 833,0 | 980,0 | 7,0 | 71,00 | 1000 | |||
| 385 | 375,0 | 6,20 | 5,00 | 6,00 | 368,0 | 20,2 | 20,0 | 6,0 | 940,0 | 15,0 | 823,0 | 994,0 | 7,0 | 70,00 | 1000 | |||
| 390 | 380,0 | 6,20 | 5,00 | 6,00 | 373,0 | 20,2 | 20,0 | 6,0 | 950,0 | 15,0 | 814,0 | 1008,0 | 7,0 | 70,00 | 1000 | |||
| 395 | 385,0 | 6,20 | 5,00 | 6,00 | 378,0 | 20,2 | 20,0 | 6,0 | 990,0 | 15,0 | 803,0 | 1021,0 | 7,0 | 69,00 | 1000 | |||
| 400 | 390,0 | 6,20 | 5,00 | 6,00 | 383,0 | 20,2 | 20,0 | 6,0 | 1040,0 | 15,0 | 793,0 | 1033,0 | 7,0 | 69,00 | 1000 | |||
|
ALL DIMENSIONS IN MILLIMETERS. |
|
*** FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF 0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
