Ürünlerimiz / Segmanlar / Inch Segmanlar / C   

 

 

 : : : : : C (H) TİPİ SEGMAN INCH : : : : :
   

 

SHAFT GROOVE SIZE  RING SIZE & WEIGHT CLEARANCE DIA. î THRUST LD. (lbs.) 
Sqr. Corner Abutment
DIAMETER DIAMETER WIDTH DEPTH FREE DIAMETER THICKNESS
**		 Wght. 
Per 1000 Pcs.		 Free 
outside dia.
REF.		 Re-
leased in
groove		 Ring Safety factor 
of 4		 Groove Safety factor
of 2
Ds
DEC		 Ds
FRACT		 Ds
mm		 Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Pr Pg
.125 1/8 3,2 ,106 ±.0015 ,020 +.002 .0095 .102 +.002 .015   .030 .165 .18 86 45
,156 5/32 4,0 .135 *.0015 ,020 -.000 .0105 .131 -.004 .015   .052 .205 .22 102 55
,188 3/16 4,8 .165   ,020   .011 .161   .015   .062 .244 .25 132 70
.219 7/32 5,6 .193 ±.002*
.0015		 ,029   .013 .187   ,025   .120 .275 .29 264 100
.236 15/64 6,0 .208 ±.002*
.002		 ,029   .014 .203   ,025   .15 .295 .31 284 115
.250 1/4 6,4 .220   ,029   .015 .211 +.003 ,025   .157 .311 .33 294 130
.281 9/32 7.1 .247   ,029   .017 .242 -.005 ,025   .19 .346 .36 335 165
.312 5/16 7,9 ,276 ±.002 ,029   .018 .270   ,025   .226 .376 .39 376 200
,375 3/8 9,5 ,335 *.002 ,029   .020 ,328   ,025   .300 .448 .47 447 270
,406 13/32 10.3 ,364   ,029   .021 ,359   ,025   .352 .486 .50 487 300
,438 7/16 11,1 ,393   ,029   .022 ,386   ,025   .359 .517 .53 528 350
,500 1/2 12,7 ,450 ±.003 ,039 +.003 .025 .441 ±.006 ,035 ±.002 .671 .581 .60 842 450
,562 9/16 14,3 ,507 *.004 ,039 -.000 .028 ,497   ,035   .710 .653 .67 944 550
,625 5/8 15,9 ,563   ,039   .031 ,553   ,035   .937 .715 .74 1045 700
,688 11/16 17,5 ,619   ,046   .034 ,608   ,042   1.3 .784 .80 1726 800
,750 3/4 19,0 ,676   ,046   .037 ,665   ,042   1.5 .845 .87 1878 1000
,812 13/16 20,6 ,732   ,046   .040 ,721 ±.007 ,042   1.7 .915 .94 2040 1150
,875 7/8 22,2 ,789   ,046   .043 ,777   ,042   2.0 .991 1,01 2202 1300
,938 15/16 23,8 ,843   ,046   .047 ,830   ,042   2.3 1,058 1,08 2355 1550
1,000 1 25,4 ,900   ,046   .050 ,887   ,042   2.7 1,130 1.15 2517 1800
1.125 1-1/8 28,6 1.013   ,056   .056 ,997   ,050   4.0 1,267 1,30 3370 2200
1,250 1-1/4 31,7 1,126 ±.004 ,056 +.004 .062 1.110 ±.008 ,050   5.1 1,415 1,44 3735 2700
1,375 1-3/8 34,9 1.237 *.005 ,056 -.000 .069 1,220   ,050   6.1 1,555 1,58 4111 3350
1,500 1-1/2 38,1 1,350   ,056   .075 1,331   ,050   7.6 1,691 1,72 4486 4000
1.625 1-5/8 41.3 1.483   .068   .071 1.463   .062   11.0 1.853 1.88 5506 4650
1.750 1-3/4 44,4 1,576 ±.005 ,068   .087 1,555 ±.010 ,062 ±.003 12.9 1,975 2,01 6526 5300
2,000 2 50,8 1,800 *.005 ,068   .100 1.777   ,062   16.2 2,257 2,30 7410 7000
   
*F.I.M.(FULL INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE  ROTOR CLIP ENGINEERING DEPT.
** FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.
    

 

 

MAXIMUM 
SECTION		 ALLOWABLE CORNER RADII & CHAMFERS MAX LOAD w/ R 
max or Ch
max (in lbs.)		 EDGE MARGIN R.P.M. LIMITS 
Standard
material
S max Tol. R max Ch max P'r Y
.031   .014 .011 85 .020 80000
.037 ±.003 .018 .014 100 .020 75000
.042   .021 .016 110 .022 73000
.044   .021 .016 260 .026 71000
.046   .022 .017 275 .028 62000
.050   .023 .018 290 .030 60000
.051   .021 .016 310 .034 56000
.053 ±.004 .024 .018 310 .036 52000
.060   .026 .020 310 .040 43000
.063   .027 .021 310 .042 40000
.065   .029 .022 310 .044 31000
.070   .030 .023 610 .050 25000
.078   .033 .025 610 .056 22000
.081   .033 .025 610 .062 20000
.086 ±.005 .034 .026 880 .068 18500
.090   .036 .027 880 .074 17500
.097   .038 .029 880 .080 16000
.105   .040 .031 880 .086 15000
.112   .043 .033 880 .094 14000
.120   .046 .035 880 .100 12500
.135   .052 .040 1250 .112 11500
.150   .057 .044 1250 .124 10500
.165 ±.007 .062 .048 1250 .138 9500
.180   .069 .053 1250 .150 8500
.195   .075 .058 1920 .162 8000
.210   .081 .062 1920 .174 7500
.240   .091 .070 1920 .200 6000
    
LARGER SIZES MAY BE AVAILABLE UPON REQUEST.