Ürünlerimiz / Segmanlar / Inch Segmanlar / BE   

 

 

 : : : : : BE HAVŞA TİPLİ AY SEGMANI INCH : : : : :
   

SHAFT

GROOVE SIZE

RING SIZE AND WEIGHT

 CLEAR. DIA. 
DIAMETER DIAMETER WIDTH DEPTH FREE
DIAMETER		 THICK-
NESS***		 BOW HEIGHT

Weight Per 1000 Pcs.

 Outside dia. REF Installed in
groove
Ds
DEC		 Ds
FRACT		 Ds
mm		 Dg Tol. W Tol. d Df Tol. T Tol. Bh min. Bh max

lbs.

 G L2
.110 7/64 2.8 .079 +.002 .022   .015 .076   .010   ,025 ,035 .20 .375 .390
.125 1/8 3.2 .095 -.000 .022   .015 .094   .010 ±.001 ,025 ,035 .06 .230 .240
.140 9/64 3.6 .102 .0015* .019   .019 .100   .010   ,022 ,032 .040 .203 .215
.140 9/64 3.6 .105   .025   .017 .102   .015   ,028 ,038 .13 .270 .285
.156 5/32 4.0 .116   .027   .020 .114 +.001 .015   ,030 ,040 .13 .282 .295
.172 11/64 4.4 .127 +.002 .029   .022 .125 -.003 .015   ,032 ,042 .16 .312 .325
.188 3/16 4.8 .147 -.000 .030   .020 .145   .015   ,033 ,043 .17 .335 .35
.188 3/16 4.8 .125 .002* .035 +.003 .031 .122   .015   ,038 ,048 .27 .375 .39
.219 7/32 5.6 .188   .040 -.000 .015 .185   .015   ,043 ,058 .28 .437 .45
.250 1/4 6.3 .210   .047   .020 .207   .025   ,050 ,065 .76 .527 .54
.312 5/16 7.9 .250   .047   .031 .243 +.002 .025 ±.002 ,050 ,065 .57 .500 .52
.375 3/8 9.5 .303   .060   .036 .300 -.004 .035   ,060 ,076 1.5 .660 .68
.438 7/16 11.1 .343   .060   .047 .337   .035   ,060 ,076 1.5 .687 .71
.438 7/16 11.1 .380 +.003 .057   .029 .375   .035   ,060 ,076 1.0 .600 .62
.500 1/2 12.7 .396 -.000 .073   .052 .392   .042   ,075 ,093 2.5 .800 .82
.625 5/8 15.9 .485

.004*

 .077   .070 .480   .042   ,080 ,098 3.2 .940 .96
.744 - 18.9 .625   .085  

.060

 .616   .050   .090 .110

4.3

 1.000

1.02
.750 3/4 19.0 .625   .085  

.062

 .616   .050   .090 .110

4.3

 1.000

1.02
.750 3/4 19.0 .580   .085   .085 .574 +.003 .050   ,090 ,110 5.8 1.120 1,14
.875 7/8 22.2 .675   .085   .100 .668 -.005 .050   ,090 ,110 7.6 1.300 1,32
.984 63/64 25 .835   .085   .074 .822   .050   ,088 .112 9,38 1.500 1,530
   
*F.I.M. (FULL INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
***FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. 
    

 

DISTANCE
Outer groove
wall to face of
retained part

TAKE-UP
Resil-ient 
take-up of tolerances
a & b

FORCE
Needed
to flatten
rings

 

ALLOWABLE CORNER RADII & CHAMFERS

MAX. LOAD
w/ R max
or
Ch max
(in lbs.)

EDGE
MARGIN

R.P.M LIMITS Standard materials

THRUST LD.(lbs.) Sqr. corner abutment

Ring 
Safety factor of 3

Groove Safety factor of 2
J min J max J max-
J min		 lbs. R max Ch max (lbs.) Y Pr Pg
.017 ,022 ,005 19 ,080 .060 60 ,030 35000 61 40
,017 ,022 ,005 8 .040 .030 43 ,030 35000 44 45
,014 ,018 ,004 6 ,029 .022 50 ,038 32000 51 60
,020 ,023 ,003 16 ,060 .045 75 ,034 32000 76 60
,022 ,027 ,005 15 ,060 .045 80 ,040 31000 81 75
,023 ,029 ,006 14 ,060 .045 90 ,044 30000 91 90
,023 ,030 ,007 12 ,060 .045 95 ,040 30000 96 90
,026 ,034 ,008 16 ,060 .045 100 ,062 30000 102 135
,029 ,039 .010 12 ,060 .045 115 ,030 26000 117 75
,036 ,046 .010 35 ,060 .045 255 ,040 25000 259 115
,036 ,046 .010 30 ,060 .045 325 ,062 22000 330 225
,045 ,055 .010 55 ,065 .050 690 ,072 20000 700 315
,045 ,055 .010 50 ,065 .050 830 ,094 16500 842 480
,045 ,055 .010 65 ,050 .035 800 ,058 16500 812 280
,056 ,070 ,014 90 ,080 .060 1110 ,104 14000 1127 600
,061 ,075 ,014 85 ,080 .060 1420 .140 12000 1441 1050
.069 .085 .016 110 ,057 .062 1900 .118 11000 1940 1050
.069 .085 .016 110 ,042 .062 1900 .124 11000 1979 1100
,069 ,085 ,016 110 ,085 .065 2000 ,170 10500 2030 1500
,069 ,085 .016 120 ,085 .065 2350 ,200 9000 2385 2050
,067 ,083 ,016 110 ,085 .065 2700 ,148 6500 2600 1750
   
ì BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN 
EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA
PLEASE CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. LARGER SIZES MAY BE AVAILABLE UPON REQUEST.